Skip to main content

Spinnaker Medias Offer Superior Resistance to Common Chemicals

There are many types of media, supplied by a variety of media manufacturers, that work well with the NeuraLabel 300x.  In NeuraLabel’s ongoing effort to identify superior medias, we’ve discovered two products by Spinnaker Coating that when used with 300x pigment inks have extreme resistance to a variety of common chemicals. In our standard chemical […]

Jordan Essentials Uses the NeuraLabel 300x for Versatility

Before contacting NeuraLabel, Jordan Essentials struggled with legacy flexographic printing services that limited their abilities and cut into their margins. NeuraLabel provided them with a responsive printing and finishing system for narrow or wide labels on demand with scalable volumes and increased flexibility to develop new products. Read the full case study.

Weber Packaging Solutions Selects NeuraLabel 300x

Weber Packaging Solutions (WPS) offers label printing as a service and also serves as a supplier to additional customers. WPS recognized an opportunity to help one of their important customers improve their short-run label printing process. The printers they were using were cumbersome, too expensive, and inferior quality. Read the full case study.

Updating 300x Firmware from a MacIntosh

Use the following steps to update your NeuraLabel 300x firmware using your MacIntosh. These instructions apply for a network or USB cable connection. MacIntosh users should contact NeuraLabel support for the appropriate firmware update file.  Note that these steps send the firmware file to the default printer.  Instructions for sending the file to a specific printer also […]

New Glossy Top-Recommended Media from Wausau

Glossy Paper Media is a favorite for consumer label printing, and NeuraLabel is excited to recommend a new label stock available from Wausau Coated.  W028717, a 60# High Gloss InkJet paper with superior brilliance, is now available for the NeuraLabel 300x printer. The W028717 has the same facecoat as Wausau’s W018890 glossy paper, but has […]

300x Media: To Perf or Not to Perf Rolled Media

This article addresses diecut media made for the NeuraLabel 300x printers. It contains a brief discussion regarding perforations between the labels, particularly applicable to rolled media. NeuraLabel 300x does not require diecut media to be perforated, however it does require the leading edge of the media to be squarely aligned when entering the printer.  It is […]

Thaw That Printer

Cold weather has finally arrived for the year!  This article provides a bit of cold weather printer trivia that can help you avoid confusion once the thermometer drops. Both the NeuraLabel 300x printer and its ink cartridges have a normal temperature operating specification of 15°C-30°C (59°F-86°F).  If the printer or ink should reach temperatures below than 5°C (40°F) an error […]