{"id":126,"date":"2023-03-07T16:00:00","date_gmt":"2023-03-07T16:00:00","guid":{"rendered":"https:\/\/www.neuralabel.com\/support-library\/?p=126"},"modified":"2023-03-10T16:59:28","modified_gmt":"2023-03-10T16:59:28","slug":"setting-up-the-callisto-printer","status":"publish","type":"post","link":"https:\/\/www.neuralabel.com\/support-library\/2023\/03\/07\/setting-up-the-callisto-printer\/","title":{"rendered":"Setting up the Callisto Printer"},"content":{"rendered":"\n<p>The following video provides instructions for unpacking and setting yo your Callisto Printer.  It does not cover the setup of accessories such as winders or stackers.<\/p>\n\n\n\n<figure class=\"wp-block-embed is-type-rich is-provider-embed-handler wp-block-embed-embed-handler wp-embed-aspect-16-9 wp-has-aspect-ratio\"><div class=\"wp-block-embed__wrapper\">\n<iframe loading=\"lazy\" title=\"Setting Up The NeuraLabel Callisto\" width=\"500\" height=\"281\" src=\"https:\/\/www.youtube.com\/embed\/WnhJ3yqnYK4?feature=oembed\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen><\/iframe>\n<\/div><\/figure>\n\n\n\n<p>The Callisto printer weighs about 55 pounds and requires 2 people to lift the printer.<\/p>\n\n\n\n<p>Before you unbox your Callisto printer, make sure you have a sturdy table near a power and network outlet.<\/p>\n\n\n\n<p>The Callisto is packaged in a 2-piece box.&nbsp; Unbox the printer by removing the 4 white handles.&nbsp; These handles attach the upper box component to the lower component.&nbsp; Do not cut the box open and do not remove the outer packaging tape.<\/p>\n\n\n\n<p>Once the 4 white handles are removed, remove the upper box.<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Remove the bag containing the network and power cables and the bag containing the ink.<\/li>\n\n\n\n<li>Remove the gray upper foam piece.<\/li>\n<\/ul>\n\n\n\n<p>The printer is packaged in a large plastic bag.&nbsp; Open this bag, and with 2 people, remove the printer from its packaging.&nbsp; Set the printer on its designated table.<\/p>\n\n\n\n<p>Next remove all blue packaging tape from the printer.<\/p>\n\n\n\n<p>At the printer entrance or right-hand side of the printer, you will see 2 pieces of orange packaging material.&nbsp;<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Remove the orange LEFT SLED CAP by grabbing its handle and pulling down and out.<\/li>\n\n\n\n<li>Remove the orange RIGHT SLED CAP by grabbing its handle and pulling to the side and out.<\/li>\n<\/ul>\n\n\n\n<p>At the printer front you will see the ink door. Open the ink door and remove the blue packaging tape.&nbsp; The remove the orange INK CAP by pulling it out.<\/p>\n\n\n\n<p>Be sure to save the packaging material and the original Callisto box in case you need to ship your printer.<\/p>\n\n\n\n<p>Open the plastic bag containing the ink and place the 4 cartridges in their respective positions under the ink door.&nbsp; You will feel each cartridge snap into place.&nbsp; When all four cartridges are in place close the ink door.<\/p>\n\n\n\n<p>Remove the protective cover from the printer screen.<\/p>\n\n\n\n<p>Attach the power and network cables to the back of the printer.&nbsp; The cables face upwards.&nbsp; For the power cable the single prong face away from the printer.&nbsp; For the network cable the smaller side also faces out.<\/p>\n\n\n\n<p>Plug in the power and network cables to the wall.<\/p>\n\n\n\n<p>Turn the Power switch in the back of the printer to the ON position.&nbsp; You will see the blue power button on the front of the printer blink and then light up.&nbsp; You will then see the operator panel boot up to the home screen.&nbsp;<\/p>\n","protected":false},"excerpt":{"rendered":"<p>The following video provides instructions for unpacking and setting yo your Callisto Printer. It does not cover&#8230;<\/p>\n","protected":false},"author":1,"featured_media":130,"comment_status":"open","ping_status":"open","sticky":true,"template":"","format":"standard","meta":{"footnotes":""},"categories":[11],"tags":[],"class_list":["post-126","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-installation-and-replacement","wpcat-11-id"],"_links":{"self":[{"href":"https:\/\/www.neuralabel.com\/support-library\/wp-json\/wp\/v2\/posts\/126","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.neuralabel.com\/support-library\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.neuralabel.com\/support-library\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.neuralabel.com\/support-library\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.neuralabel.com\/support-library\/wp-json\/wp\/v2\/comments?post=126"}],"version-history":[{"count":2,"href":"https:\/\/www.neuralabel.com\/support-library\/wp-json\/wp\/v2\/posts\/126\/revisions"}],"predecessor-version":[{"id":129,"href":"https:\/\/www.neuralabel.com\/support-library\/wp-json\/wp\/v2\/posts\/126\/revisions\/129"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.neuralabel.com\/support-library\/wp-json\/wp\/v2\/media\/130"}],"wp:attachment":[{"href":"https:\/\/www.neuralabel.com\/support-library\/wp-json\/wp\/v2\/media?parent=126"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.neuralabel.com\/support-library\/wp-json\/wp\/v2\/categories?post=126"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.neuralabel.com\/support-library\/wp-json\/wp\/v2\/tags?post=126"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}