• Afinia L801 label printer front
  • Afinia L01 label printer with rewinder
  • Afinia L801 label printer with watershield label with condensation
  • Afinia L901 label printer video

Afinia L801/L801 Plus
Commercial Color Label Printer

  • High volume and roll-to-roll printing
  • Prints on media 2′′ to 8.5′′ wide
  • Superfine resolution for crisp text and barcodes
  • Compatible with a wide range of paper and synthetics
  • Water-resistant inks available
  • Optional XL Unwind/Rewind system
  • Fast dye-based inkjet prints at speeds up to 12 ips

L801/L801 Plus
Commercial Color Label Printer

The combination of print quality, speed, and ink cost is tough to beat.

The L801 is a Memjet-powered industrial inkjet printer that is ideal for short- to medium-range print runs for prime and secondary labeling applications. It prints on continuous or die-cut stock from 2 to 8.5 inches in width, in full color, and at speeds of up to 60 feet per minute. Super-fine resolution makes for crisp text and barcodes, even at very small sizes. This detail, combined with vivid colors and rich blacks, makes labels look sharp and vibrant. The L801 is also compatible with a wide range of paper, polyester, polypropylene, and vinyl label stocks.

Afinia L801/L801 Plus Printer Specifications
PRINTER
Print Method Memjet Waterfall Printhead Technology® 11 Integrated Circuit (IC) Chips — 70,400 nozzles (6,400 per IC Chip)
Inks Dye-based, 250mL CMYKK cartridges (1.25L total) — Watershield water-resistant formula available
Print Resolution 1600 x 1600 dpi to 1600 x 800 dpi
Print Speed 6′′ — 12′′ per second (152mm–305mm)
Print Width 8.5′′ (216mm)
MEDIA
Media Types Compatible with a range of paper, polyester, polypropylene, and vinyl label stocks
Media Width 2′′–8.5′′ (50.8mm–216mm)
Media Length 2′′–40′′ (50.8mm–1016mm)
Thickness Minimum 0.005′′ (0.13mm) Maximum 0.01′′ (0.3mm, including liner)
Maximum Roll Diameter 8′′ (203.2mm)
Core Diameter Requires 3′′ (76.2mm) cardboard core
Media Sensors Gap, continuous, black mark
Die-Cut Label Gap Minimum 0.125′′ (3.0mm) Maximum 0.3′′ (8.0mm)
Black Mark 0.125′′ (3mm) wide, 1′′ (25.4mm) long, left side position
GENERAL
Cutter/Sheeter Powered
Interfaces USB 2.0, TCP/IP (Manual IP configuration or DHCP), GPIO available for external device control
Operating System Windows 7+ (32 and 64 bit)
Barcode Font 1D Barcode at least Grade B (Code39) with 10mils bar width
Two-Dimensional Code Printing 2D Barcode at least Grade B (PDF417) with 10mils cell size
Operating Temperature 59°–95°F (15°–35°C) at RH 20–80%
Storage Temperature 23°–113°F (-5°–50°C) at RH up to 85%, non-condensing at 65°
Overall Dimensions 18.9′′ (480mm) W, 19′′ (485mm) D, 21.1′′ (535mm) H
Weight 85 lbs. (38.5kg)
Rated Voltage AC 110V – 220V, auto-sensing
Rated Frequency 50—60Hz
Agency Certifications CE, FCC, UL
Warranty One year
Afinia Part Numbers L801 Printer: 23139
Black Ink: 22453
Cyan Ink: 22467
Magenta Ink: 22474
Yellow Ink: 22460

LL801 Plus Printer: 31091
Black Plus Ink: 30412
Cyan Plus Ink: 30424
Magenta Plus Ink: 30433
Yellow Plus Ink: 30419
L801 Rewinder: 23125

Contact support at support@NeuraLabel.com or 281.207.8555 x1.